350W Oxygen Hydrogen Gas Flame Generator 75L/H Torch Acrylic Polisher

350W Oxygen Hydrogen Gas Flame Generator 75L/H Torch Acrylic Polisher Machine The H2O generator uses a mixture of cold distilled water and an electrolyte like KOH (NOT PROVIDED) to create a flame that burns at ≥ 2600°C. The result of this electrolysis is an environmentally friendly oxygen (O2) and hydrogen (H2) mix with no carbon byproducts with a maximum gas output of 75 L/h. The unit can be used in series or parallel adding to it’s efficiency. Feature Acrylic (synthetic glass) polishing, Oxy-hydrogen generator is a machine using high temperature flame to make acrylic edge smooth and bright. Polishing machine takes water (distilled water and pure water) as fuel, strong and durable, light weight and portable.You can carry it to anywhere you need to use it. The gas flame generator can be used in heat treatment for metal part, weld the hinge of spectacles rim, cut and fuse quartz or fine parts, seal the injection glass bottle, conforming to GMP industrial standards. When the tank levels get low, refill with just distilled water. If the current drops below an acceptable level for your application, add more of the electrolyte solution in small increments to ensure it is fully dissolved. Acrylic flame polishing machine provides a convenient and safe oxy-hydrogen flame, also can be used in engineering precision school laboratory. Please unscrew the nozzle knob to remove the residual gas after you turn off the machine. Specification: Flame Gun No.: Single Input Voltage: 110 V Electrolyzer Capacity: 1.6L Flame Temperature:≥2800°C Ambient Temperature: 10°C ∼ 40°C Maximum Output Gas: 75L / H Water Consumption (L / H):0.015 L / H Operation Gas Pressure:    0.08 - 0.13Mpa Machine Dimension: 32 5 mm x 22 5 mm x 31 5 mm (12.6" x 8.7" x 12") Machine Weight: 10 kg Package Included: 1 x Machine 1 x Flame Gun 1 x Plastic funnel 1 x Flame Spray Nozzle 1 x Rubber Tube 1 x Power cable 1 x Instruction Note: When the tank levels get low, refill with just distilled water (no electrolyte solution). If the current drops below an acceptable level for your application, add more of the electrolyte solution in small increments to ensure it is fully dissolved. 1. Please contact us first to solve if there is any problem about item before left feedback, many thanks. 2. We accept PayPal, G Pay, VISA, Master Card which permitted by ebay. 1. All stock is based in US and will be dispatched within 24 hours after payment. 2. PO BOX address is not acceptable. 3. Normally delivered within 5~8 working days. 4. Returns are accepted within 30 days of purchase. 1. Please message us through eBay if you have any questions. 2. All emails and messages will be replied to ASAP during open hours. 3. From Monday to Friday 9.00am - 6.00pm. 4. If you have any quality problems or you are not pleased with the purchase, please contact us through email. 5. We will be happy to assist you if if any item needs to be returned or replaced. Certain images/photos incorporated into this template are the property of JuperiterImages, used with permission under license.

Returns Accepted for this item if it's within 30 Days