The AlphaMIG 231MS is a powerful solution to your welding needs. It is a heavy-duty IGBT inverter based MIG and Stick welder backed up by it's three year parts and labor warranty. This MIG is designed for heavy service applications and can stand up to daily industrial use with an industry leading 50% duty cycle at 230A. This means the welder can weld for sustained periods (5 minutes out of 10) at maximum output without a break. Compare duty cycles to other name brand products and you'll see as low as 15% duty cycle at this maximum output level. While it's compact, the unit supports the use of both 8" and 12" rolls of wire. This is good for 10 to 44 lbs of wire. It will also easily handle from .023" to .045" diameter solid steel or stainless wire with the included drive rolls. This welder is also suitable for Gas-less Flux-Cored use for .035" to .045" wire with the included Flux-Cored Drive rolls. The unit's heavy duty 4 drive roll system can feed wires flawlessly without slippage. With wires .035" and .045", the drive roll system can easily feed solid wire up to 15 ft. with the optional length gun. For those needing production welding of 1/8" and thicker aluminum, the unit can weld with either the stock 10 ft. MIG gun with optional polymer liner inserted and and optional U-groove drive rolls with .035 to .045" wire. It can be outfitted with an optional spool gun for feeding .030" and .035" wire. The stick function of this welder allows almost any rod to be used including E6010. The welder delivers a noticeably smooth and stable arc not found even in many stick welders. Advanced functions like hot start and arc force control allow the user to tailor the welding performance to the user's needs. For steel, the unit can be used to weld from 24 gauge up to 5/16" in single pass (a best practice, practical recommendation). It's perfect for multi-pass welding with a practical limit of up to 1/2". For Aluminum, expect practical welding capability from 1/8" up to 1/4" single pass, with practical capability up to 3/8" multi-pass. For Aluminum, expect practical welding capability from 1/8" up to 1/4" single pass, with practical capability up to 3/8" multi-pass. Specifications : Input Voltage: 120/240V OCV: 60V 120V Inrush (I1max): 30 240V Inrush (I1max): 38A 120V Rated (I1eff): 22A 240V Rated (I1 eff): 27A MIG: Spool Gun Compatible: Yes Output Range 120V: 30-125A/ 15.5-20.25V Duty Cycle Rating 120V: 50% @ 125A/20.25V Output Range 120V: 30-230A/15.5-25.5V Duty Cycle Rating 240V: 50% @ 230A/25.5V Stick: Output Range 120V: 10A-100A/20.4-24V Duty Cycle Rating 120V: 50% @ 100A/24V Output Range 240V: 10-180A/20.4-27.2V Duty Cycle Rating 240V: 50% @ 180A/27.2V What's Included: 24 series MIG Gun 10 ft. , with Euro Quick Connector 200A Stick Electrode Holder 10 ft. with 35 DINSE Type Connector 250A Ground Clamp 10 ft. with 35 DINSE Type Connector Argon Regulator with Hose 240V to 120V Pig-Tail Adapter 12" to 8" Spool Adapter Spare Contact Tips 2pc. Drive Roll Kit (Installed): Steel/Stainless (V Groove) .035-.045" 2 pc. Drive Roll KIt: Steel/Stainless (V Groove) .023-.030" 2 pc. Drive Roll Kit: Flux Core (serrated groove) .035-.045" Features : MIG: Spot Timer: For tacking up and welding sheet metal. Stitch Timer: For cycling Spot Timer on and off repeatedly for stitching effect on long seams. Burn Back Timer: Used to auto-trim wire stick out immediately after weld has ceased. Automatic Pre-Post Flow and OFF setting: To improve weld starts and stops by providing gas coverage slightly before the weld starts and after the weld ends. OFF setting if not required. Cold Wire Feed: To allow user to change wire without having to depress the trigger and waste gas. Test Gas Flow: To allow user to set gas flow rate without having to depress trigger and waste wire. Inductance: Allows user to adjust crispness vs. fluidity of the weld. Spool Gun Function: To allow use with optional spool gun. Flux-Cored Function: To allow use with self-shielded (gasless) Flux-Cored wire. Rear Cooler Plug: To allow use of optional water cooled gun for heavy, continual use. To be used with AHP cooler only. Stick: E6010: Allows user to select special performance for E6010 and other cellulose based fluxed rods. Standard: Allow use with almost all other types of welding rods besides cellulose based fluxed rods. Hot Start Timer: Allows the user to control how long the hot start stays activated during arc striking. Hot Start Intensity: Allows user to add extra amperage (via a percentage over set amperage) during arc striking to prevent cold lap and porosity at the start of the weld. Maximum amount is subject to total Amperage available. Arc Force: Allows user to adjust the crispness versus fluidity of the weld puddle. Options : 24 Series MIG gun 15 ft. (for use with .035 and larger wires only) 10 ft. Poly Liner for welding Aluminum with Stock gun and U groove Drive Rolls U groove Drive Rolls (.035"-.045" only) for Aluminum Spool Gun
Returns Accepted for this item if it's within 30 Days