Store Categories
Store Categories
Battery Welding Machine Portable Mini Spot Welder Machine 18650 Battery USB USA Details Features 1.9-speed power adjustable, five-level power display. Simple and convenient, powerful 2.5V charging, more convenient to use 3. Spot welder send nickel belt, one-handed, convenient to use 4. Charging display, buzzer alarm, more secure 5. Support 0.1~0.12mm thickness nickel piece, intelligent identification, automatic welding, simple and convenient operation Specification Maximum output current up to 1200A Fully charged can continuously weld more than 1000 times Five power levels can be adjusted, short press button control, blue light indication Charging port: USB plug charging Charging voltage: 5V input (higher voltage input is strictly prohibited) Charging current: 1A (5V/2A charger recommended) This product supports charging while using, the remaining power indication: green (high), green flash (high), red flash (low), red (low), the red light is on must be charged to work. Low power will affect the welding effect Switching instructions Short press to power on Long press to shut down 6 minutes without any operation will automatically shut down Note Copper, aluminum surface can not be welded, rusty surface can not be welded, smooth stainless steel surface can be welded normally. Part of the battery an electrode is stainless steel, an electrode is aluminum, our spot welder can weld stainless steel electrodes, aluminum electrodes need ultrasonic welding, please note. Remind again, aluminum electrode, copper electrode can not be welded. Common 18650, 32650 and other round batteries can be welded. The two needles are steadily pressed on the nickel piece before output welding, lift, and then weld next time. Instructions for use Spot welding nickel sheet 1. the battery should be fully charged, must be fully charged, spot welding nickel sheet, the thickness can not be thicker than 0.12MM. 2. spot welding attention to the pressure. The harder you press, the less heat; the lighter you press, the greater the heat; but too light will be perforated, too heavy and point not firm. So you need the right strength, do not press too hard. 3. the battery should be polished smooth, remove the surface of the oxide layer and uneven. Solder pen if oxidation black, please use fine sandpaper polished smooth. 4. 4. Use the most pointed point of the pen, so that you can also point firmly. Welding method: Visualize the welding tip, and the horizontal plane into 60 ° grip, two needles at the same time pressed in the nickel surface pressure, good contact, current flow from one needle to the other needle, high current melting nickel, so that the battery and nickel welding success. List 1 x Spot welder 1 x Nickel strip 1 x USB charging cable Shipping Policy Payment Method Returns Policy Shipping Policy Payment Method
This is the description of Payment Method.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way. Returns Policy
This is the description of Returns Policy.
Do not dismiss your dream.
To be without dream is to be without hope.
To be without hope is to be without purpose.
Do not run through your life so fast that you forget not only where you have been, but also where you are
going.
Life is not race, but a journey to be savored each step of the way. Copyright©2017 DataCaciques
Battery Welding Machine Portable Mini Spot Welder Machine 18650 Battery USB USA Details Features 1.9-speed power adjustable, five-level power display. Simple and convenient, powerful 2.5V charging, more convenient to use 3. Spot welder send nickel belt, one-handed, convenient to use 4. Charging display, buzzer alarm, more secure 5. Support 0.1~0.12mm thickness nickel piece, intelligent identification, automatic welding, simple and convenient operation Specification Maximum output current up to 1200A Fully charged can continuously weld more than 1000 times Five power levels can be adjusted, short press button control, blue light indication Charging port: USB plug charging Charging voltage: 5V input (higher voltage input is strictly prohibited) Charging current: 1A (5V/2A charger recommended) This product supports charging while using, the remaining power indication: green (high), green flash (high), red flash (low), red (low), the red light is on must be charged to work. Low power will affect the welding effect Switching instructions Short press to power on Long press to shut down 6 minutes without any operation will automatically shut down Note Copper, aluminum surface can not be welded, rusty surface can not be welded, smooth stainless steel surface can be welded normally. Part of the battery an electrode is stainless steel, an electrode is aluminum, our spot welder can weld stainless steel electrodes, aluminum electrodes need ultrasonic welding, please note. Remind again, aluminum electrode, copper electrode can not be welded. Common 18650, 32650 and other round batteries can be welded. The two needles are steadily pressed on the nickel piece before output welding, lift, and then weld next time. Instructions for use Spot welding nickel sheet 1. the battery should be fully charged, must be fully charged, spot welding nickel sheet, the thickness can not be thicker than 0.12MM. 2. spot welding attention to the pressure. The harder you press, the less heat; the lighter you press, the greater the heat; but too light will be perforated, too heavy and point not firm. So you need the right strength, do not press too hard. 3. the battery should be polished smooth, remove the surface of the oxide layer and uneven. Solder pen if oxidation black, please use fine sandpaper polished smooth. 4. 4. Use the most pointed point of the pen, so that you can also point firmly. Welding method: Visualize the welding tip, and the horizontal plane into 60 ° grip, two needles at the same time pressed in the nickel surface pressure, good contact, current flow from one needle to the other needle, high current melting nickel, so that the battery and nickel welding success. List 1 x Spot welder 1 x Nickel strip 1 x USB charging cable Shipping Policy Payment Method Returns Policy Shipping Policy 1.We only ship to the confirmed address provided by eBay. please make sure your ebay address is 100% matches the address you would like us to ship to. If not, please let us know before we sent you the package, or we will not be responsible for any loss. hope you could understand. 2.Orders will be processed instantly and dispatched within 1-2 business days except hoilday, so we do NOT accept any email/message note after you place orders. 3.All package need to wait 30 days , Please take care it.Less than 30 days,we can't take a refund . Payment Method 1.We accept PayPal payment ONLY, and must be received within 5 days from the date of purchase. 2. It is easy and safe for you to pay by credit cards, debit cards, bank transfers and PayPal account balances. 3.Buyers are responsible for import duties,custom fees and taxes, if any, please check your country. Returns Policy 1.We believe our items are so outstanding. We are convinced you will be happy with your Purchase. 2. If you do not satisfy with our items. Please simply return to us within 30 Days in original condition. Just pay for the returned postage. Then we can issue full refund or resend the item to you after the returned item arrived at our warehouse. 3. Please include your eBay ID and item number with any email requests.
Returns Accepted for this item if it's within 30 Days