CUT-60HF is a newly designed with the meter and
adjustment attached to the front of the machine and the filter is located
inside the machine. The new and improved model makes it more convenient and
easier to use. New digitally controlled 20-60 amps Plasma Cutter Machine with advanced inverter
technology and high cutting performance . Designed for portable repair work and small
business project use, CUT-60HF Air Plasma Cutter cuts a thickness of 4/5 in.,
and the max severance thickness is 1.2 in. I ncorporates advanced Non-touch pilot arc cutting technology, with an excellent Arc stability. Very easily cutting surface is rough, the serious rust, with oil and spray paint of metal materials, and better cutting quality, finish the work faster. Can cut up to 1.0 in. stainless
steel, alloy steel, low carbon steel, copper, iron, pig iron, cast iron,
aluminum alloy, aluminum and other conductive metals, resulting in straight
cuts, angles, holes, curves, notches, slots, circles, v-grooves, and many
others in minutes. 95~260V
wide voltage, 50/60Hz, almost all
of the voltage and frequency can be used, and is designed for both demanding industrial work, construction.
It requires less work to produce an overall better result with a cleaner cut. Quick setup: NPT 1/4" industry type D coupler can
connect easily with the pre-installed plug on the air compressor. The
filter is located inside the machine with an automatic air control
solenoid valve. Automatic
compensation for voltage fluctuation, over-voltage protection, under-voltage
protection, over-current protection, over-load protection, automatic
temperature control, and fan dormancy.
Specifications: Type: Non-touch Pilot Arc Plasma Cutter Supply Power: 95~260V, 50/60Hz, 1-Phase Rated Input Current: 230V/46 Amp, 115V/48 Amp Cutter Current Range: 230V/20-60 Amp, 115V/20-35 Amp Nominal DC Open Circuit Voltage: 280-Volt Output Voltage: 104-Volt Duty Cycle @ 104F(40c): 60% @ 60 Amp Efficiency: 89% Power factor: 0.93 Output Terminal Type: Direct Wire Cooling Method: Fan Air Cooled Gas Supply : Clean D ry O il- F ree A ir Gas Pressure Range : 30 - 90 psi Recommended Gas Inlet Flow : 5.5scfm @ 90 psi Maximum Severance Cutting Thickness:
1.2 in. Movement
Speed: 15.0 in./min Net Weight: 25.0 lbs. Product Size: 15.72 x 8.52 x 12.85 in. Package Weight: 34.8 lbs. Shipping Size: 20.0 x 12.6 x 14.8
in.
Package
Included:
CUT-60HF Non-touch Pilot Arc Plasma Cutter Machine. 13 Feet (SG-55/AG-60) Plasma Cutter Torch Gun Assembly. 10 Feet 300A Work Clamp Assembly, 35-50mm Lead Dines. 230V
to 115V Power Adapter. Air
Filter and Pressure Gage (Installed inside the machine). Owner’s
Manual.
Returns Accepted for this item if it's within 30 Days