Notify me when the price drops
We will email you if we find a lower price on this product!
Product Description
The Cyclone 312 simply delivers beast mode performance. As one of our newest generation inverter MIG/Stick welders, offering up to 315A MIG output and 250A Stick output with 35% duty cycle at maximum output the Cyclone 312 outdelivers similar competitor models on both maximum output and duty cycle. Even though it's the most powerful in it's class, the inverter design also makes it among the smallest and lightest in its class for a self-contained, trolley type (self contained undercarriage) welder. It's definitely smaller and lighter than it's transformer based competitors. The new digital user interface of the machine features a 4.3" TFT LCD display. This display offers full contrasting color with bright and large numerical readouts so that settings can be easily read, even from far away. This new design incorporates many extra features which include pre and post gas flow control, inductance (arc force), and burn back control to improve weld quality and performance. Of course, keeping true to its industrial design it also features functions like 2T and 4T control for long seam welding. For the applications where body work, building vessels, or hanging large panels and sheets are required the unit features spot and stitch timers which work together to provide consistent and high quality spot welds and seam sizes. One of the new features include a professional level "Power Set" mode which allows all users, new or advanced, rapid, no-guess setup. The user simply provides operating parameters such as gas, wire type and size and the machine will provide the user with the correct Volts and Wire Speed with an adjustable range that can be fine tuned for specific applications such as position, or welding thick to thin. And if you create your own special programs, this machine features a memory function that can save multiple programs in both MIG and Stick modes.
For those needing aluminum work, the unit will work well with the Parker DSP 360 spool gun and offer premimum quality aluminum MIG welds, or for bulk aluminum use, the operator can choose to use the optional polymer liner with the stock 36 series MIG gun and optional U-groove aluminum drive rolls to drive the aluminum through the gun. Not many MIG guns have this feature, but when you need to lay down a lot of aluminum, it's nice not to be constricted by a bulky spool gun.
As a stick welder, the machine is highly capable, providing up to 250A output which allows use with cellulose type rods such as E6010 and in powerset mode, it offers specialized settings for many different steel rods.
315A
Max Rated Stick Amps:250A
MIG Amps/Volts @ Rated Duty Cycle:64A
Maximum Rated (I1EFF ) Input Amps:38A
OCV:70V
MIG Output Range:30- 315A /15.5- 29.8V
Stick Output Range:10-250A / 20.4-30V
Variable MIG Inductance/Stick Arc Force Control: YesSpool Gun Capable: YesPulse: NoStandard Drive Roll wire size: .035”-.045”Separate wire feeder: No, self containedNumber of Drive rollers: 4Max Wire Feed Speed:700 IPM
Max Wire Roll Diameter: 12” (full size up to 44lb)Memory: YesPreflow time:Adjustable
Post Flow Time:Adjustable
Flux Core: Yes, OptionalAir Carbon Arc: No2T/4T /Torch latch/Trigger: YesTorch Type:MB 36 series
Other Features:This unit is intended for Commercial/Industrial/Agricultural use, with facilities wired for commercial single phase 240V use. However, before installing this unit in any facility, consult a licensed electrician, and refer to Article 630 in the NEC for proper wiring instructions for welders. Use the Maximum Inrush and the Effective rated current for breaker and wiring sizing (respectively). If using for residential, or home shop use, make sure the wiring codes are followed and proper breaker sizes are installed. If this unit is to be used with a generator, the generator MUST be rated for 5% or less THD (Total Harmonic Distortion), which is typically regarded as the maximum threshold for clean power rated generators. In addition, the total surge wattage rating must be 16000 watts or greater. Use with undersized generators, or with generators not rated by the generator's manufacturer as "5% or less THD" is prohibited and will void the warranty.
This unit is not intended for arc gouging or cutting. Such use may damage the machine and void the warranty.
Note: Steel/Stainless Single Pass figure is based off of Axial Spray transfer mode. All Aluminum should be done in Axial Spray only. Single/Multi- pass recommendations are not necessarily recommended or accepted as best industry practice and intended for use with properly prepped and beveled joints.
Optional Drive rolls may be required to achieve minimum or maximum specifications..