Power i-TIG 200T
310 579 2075
- Home
- About Us
- Contact Us
- Shop Policies
- FAQ
- Feedback
Store categories
- DC TIG Welders
- ACDC TIG Welders
- MIG Welders
- Stick Welders
- DC Combo
- ACDC Combo
- MTS Combo
- Coolers
- Accessories
- Plasma Cutters
- Generators
Product Description
The Thunder 255 is a versatile work horse product designed for multiple processes. Whether you need the machine for MIG, DC TIG, or Stick welding, the unit can fit most any welding shop with welding needs as a fabrication or production welder. The legendary IGBT inverter powered technology that Everlast uses in this unit is digitally controlled with a microprocessor to deliver the most stable and controlled arc possible in a wide variety of circumstances. The Thunder 255 also gives the user a broad range of functions, features as well as a wide range of adjustment not found on other welders in this welder class. It is also additionally supported long term with Everlast's Platinum 5 year warranty and is further backed with a 3 year shipping coverage protection if warranty support is ever needed.
With a built in wire feeder, the Thunder 255 functions well as both a standard MIG ( Short Arc and Spray) and a Pulsed Spray MIG ( Single Pulse) welder with function selections for both. In addition, this model also has selections for FCAW and FCAW-P ( Self-Shielded Flux Core and Gas Shielded Flux-Core) wires.
PRODUCT EXTRAS
Features & Benefits:
- All digital DC CC/CV Multi-Process inverter design offers the perfect welder for nearly every task.
- 4.3 HD Color LCD screen
- Intuitive setup
- Short Circuit, Spray Arc operation
- Synergic Single Pulse MIG operation
- Flux-Cored (Gasless or Gas-Shielded) operation
- Pulsed TIG operation
- E6010 Operation for root pass welding
- PowerSet mode for easy setup and use even with Pulse MIG function
- Full manual mode with complete control of settings
- Light weight design makes the unit extremely portable, ideal for jobsites and motorsports.
- 8" and 12" Diameter wire spool capacity provides a good compromise for long duration welding and portability.
- Synergic MIG operation or Standard MIG operation.
- Easy to use, operator friendly panel to select features.
- Adjustable MIG Wave Form control manages slope/ inductance and fine tunes arc characteristics.
- Adjustable Arc Force Control allows the user to dial in desired Stick welding performance.
- Adjustable TIG Up/ Downslope allows the user to control the end of the welding cycle.
- Adjustable Burn back control keeps wire energized after feeding stops to burn back the wire to a perfect length without needing to trim wire for restarts.
- Foot Pedal for TIG and TIG torch included.
- Spool gun and Push Pull Capable for MIG
- Exclusive 30 channel memory function allows favorite settings to be stored for quick setup.
- High Frequency Start and Lift Start Modes for TIG
- 2T/4T torch trigger/latch function offers stepped control welding with TIG and MIG.
- Adjustable Pre and Post flow for TIG and MIG operation improves over all weld quality by reducing porosity during start/stops.
WHAT'S INCLUDED
Standard Equipment:
- 36 series MIG Gun with 10 ft. cable and Euro style quick connector
- 26 series Air-Cooled TIG Torch with 12.5 ft. cable and 35 DINSE connector
- 2T/4T Torch Switch with 12.5 ft cable and 2 Pin MTS male plug
- Stick Electrode Holder with 10 ft. cable and 35 DINSE connector
- Ground Clamp with 10 ft. cable and 35 DINSE connector
- Foot Pedal MTS with cable and 7 Pin MTS male plug
- Argon Regulator with Hose
- Starter Consumable TIG Kit (tungsten not included)
- Spare Contact Tips
- Drive Roll V Groove .035"-.045" (Single)
OPTION
Optional Equipment:
- Parker DSP 360 Spool Gun
- V Groove Drive Rolls (Hard Wire)
- Flux Core Drive Rolls
- U Groove Drive Rolls (Aluminum Wire)
- NOVA Torch and Pedal Kit for Lightning MTS225
- Foot Pedal
- NOVA Slider AMP Control
- Protective Welder Cover
- NOVA Welding and Fabrication Table
- NOVA Clamp and Tool Kit
- Air-Cooled 9/17/26 series TIG Torches
- Water-Cooled 18/20 series TIG Torches
- Amp Control TIG Torches
- TIG Consumables Kits
- MIG Liners
- MIG Guns
- MIG Consumables Kits
- PowerCool W300 Water Cooler
- PowerCool W400 Water Cooler
- PowerCart 250
RECOMMENDED USES Recommended Areas of Use:
TECH SPECS
Type: Digital/Micro-controlled IGBT InverterOutput /Process Type: MIG, DC TIG, DC StickVoltage/phase: 220/240 V 1 PHASEMax Rated MIG Amps:
275A
Max Rated TIG Amps:
250A
Max Rated Stick Amps:
220A
MIG Amps/Volts @ Rated Duty Cycle:
275A/27.8V @ 60% Duty Cycle (40°C/104°F)
TIG Output Amps/Volts @ Rated Duty Cycle:
250A/20V @ 60% Duty Cycle (40°C/104°F)
Stick Amps/Volts @ Rated Duty Cycle:
220A/28V @ 60% Duty Cycle (40°C/104°F)
Max Inrush ( I1MAX ) Amps:
48A
Maximum Rated (I1EFF ) Input Amps:
38A
OCV:
80V
MIG Output Range:
30-275A/15.5-27.8V
TIG Output Range :
10A-250A/ 10.4V-20V
Stick Output Range:
10-220A/20.4-28V
Variable MIG Inductance/Stick Arc Force Control: YesSpool Gun Capable: YesPulse: SinglePulse Frequency:
MIG: Synergically Controlled
TIG: 0-500Hz
Pulse Time On:
MIG: Synergically Controlled
TIG: 5-95%
Pulse Volts:
MIG: Synergically Controlled Pulse Voltage
TIG: 10-90% of Welding Amps (Not Volts)
Standard Drive Roll wire size: .035”-.045”Separate wire feeder: No, self containedNumber of Drive rollers: 4Max Wire Feed Speed:
600IPM
Max Wire Roll Diameter: 12” (full size up to 44lb)Memory: YesFoot Pedal: StandardAir Carbon Arc: No2T/4T /Torch latch/Trigger: YesTorch Type:
MIG: North 36 series with yellow (.062") and red steel liner (.045")
(Other liners available
TIG: 26 series TIG torch
Other Features:
DC TIG Pulse Wave form Shaping
HF TIG Start
Run-in
Wire Jog
Gas Purge
PowerSet Mode
Push-Pull Capability
NOTES
Product Notes:
Use only with a clean power rated (clean sine wave) generator that produces no more than 5% THD distortion. Use with only with a generator capable of producing a minimum of 13, 000 surge watts.
This unit may require the purchase of additional drive rolls, MIG guns, and MIG gun liners to weld with wire smaller than .045". Additionally, this gun is designed for primarily axial spray (spray arc) welding. For best results with smaller liners, purchase a 24 series MIG gun and a blue liner for .035" diameter wire. A teflon liner is required for aluminum along with U groove drive rolls.
Wire use with .023" and .030" wire will require a 15 series gun for best operation (in addition to the correct sized drive rolls).
Extensive or dedicated Flux-Cored use will require a special flux cored gun, not supplied by Everlast.
MINIMUM/MAXIMUM
- Minimum/Maximum:
NOTICE:
Maximum single pass ratings are statements of what is possible by skilled users in optimal conditions and joint preparation. These are not necessarily considered industry "Best Practice" settings and may not produce the best welds under welding codes. These ratings should be for comparative purposes, and not considered as a recommended daily practice.
Minimum/Maximum:
MIG:
- Weld up to a maximum of 7/16" Steel/Stainless single pass
- Weld over 3/4" Steel/Stainless multi-pass
- Weld a minimum of 24 gauge Steel/Stainless
For MIG welding Aluminum, use the supplied 10 ft MIG gun, U-groove drive rolls and the polymer liner (best choice for shorter distances). For longer required distances, choose between the Parker SG360A Push-Pull Gun (Recommended for longer distances) or the Parker DSP 360 (Recommended for small weld quantities/longer distances) For Brazing, follow same recommendations for gun selection.
- Weld up to a maximum of 3/8" in a single pass weld Aluminum
- Weld over 3/4" in multiple pass welds Aluminum
- Weld a minimum of 14 Gauge Aluminum
TIG:
- Weld up to a maximum of 1/2" single pass
- Weld up to a maximum of 3/4" multi-pass
- Weld a minimum of .015" thick
Stick:
- Weld with a maximum of 3/16" diameter electrode
- Weld with a minimum of 1/16" diameter electrode
Maximum electrode thickness is ultimately dependent upon electrode type and electrode manufacturer.
Returns For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately.
DOA items: In the event you receive a non working unit , we will exchange it free of charge.
Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost.
Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines.
2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on eBay. We will do our best to expedite backordered items as soon as possible.
3- Please provide a physical address. We will not ship to a PO Box.
4- Shipping charges are for the (48) Continental United States only.
5- We don’t ship to Canada
6- We charge CA tax on all orders 9.5%
7- If you pay via PayPal, shipping will be to your confirmed address only
8- Shipping to AK, HI and PR is more. please email for price.
Contact
Operating Hours:Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)