Store categories SKU: PT-400EXT Product Description If you need the most power the PowerTIG 400 EXT is the latest and most
powerful member of Everlast's PowerTIG series of TIG/Stick welders. With
240V single phase power, it delivers a full 400A in TIG mode, thanks to
it's constant-on, high output fan cooling. That's enough power to weld
most every TIG welding chore found in most any shop and do it without
stopping every minute or so to rest. Compared to other competitors in
it's class it's also more duty cycle in single phase than any other
welder as well with a 35% duty cycle at the full 400A in TIG mode. The
welder also has a generous 270A output @ 35% duty cycle in stick mode
which means it has enough stick power to tackle almost any common stick
fabrication or repair chore with up to 1/4" electrode. For TIG,the
Advanced AC pulse feature this unit is capable of delivering
considerably more TIG welding capability (thickness) than any other unit
in it's class. This unit is designed to get the job done where thicker
plate and weldments are common. As far as features go, the PowerTIG
350EXT doesn't fall short either. It has all the familiar features
you've come to expect in the EXT digital class of welders from
Everlast. as far as basic layout and operation are concerned for those
shops that want to upgrade to a heavier unit without retraining
personnel. Duty cycle is a favorable 35% at maximum output and is able
to go the distance with its high output constant-on fan design. As far
as low end performance goes, this brute is far from clumsy. It features
a respectable 5A DC and 10A AC low end operation capability. Just add
a power plug, gas and Tungsten, and you are ready to weld.
PRODUCT EXTRAS
Features & Benefits:
Digital microprocessor control Heavy-Duty IGBT Power Modules increase reliability and performance Low amp operation down to 5 Amps DC and 10 Amps AC 2T/4T/ Pedal operation modes with additional 2T/4T mode for torch amptrol operation. Wave form control in AC provides 4 wave forms: Sine, Triangular, Soft Square and Advanced Square Wave New High Frequency start design reduces maintenance issues and improves start reliability No hidden menus to access or complicated set up routines Simplified menu design allows settings to be quickly selected and adjusted Easy Start Up feature in AC or DC modes to make setup quick and easy for the beginner, or the advanced user Pulse up to 500Hz in DC, 250 Hz AC 10Hz Advanced AC Pulse mode improves penetration on thicker metals, and can reduce warping and burn through on thinner metals Arc force control, Hot start time, Hot start intensity settings for Stick welding to improve performance VRD function to help reduce chance of shock or electrocution in areas where a VRD is required or needed for stick welding Full time fan for maximum duty cycle operation 240V 1 phase operation Spot Weld Timer 6010/Cellulose Stick welding capability 240V cooler plug located on rear
WHAT'S INCLUDED
Standard Equipment: 18 series Water-Cooled TIG torch with 12.5 ft. calbes and 35 DINSE connector and torch switch for 2T/4T operation 26 series Air-Cooled TIG torch with 12.5 ft. calbes and 35 DINSE connector and torch switch for 2T/4T operation Stick Electrode Holder with 10 ft. cable and 35 series DINSE connector Heavy Duty Ground Clamp with 10 ft. cable and 35 series DINSE connector New redesigned compact foot pedal New Everlast Regulator made from billet brass (gas hose included) Starter Consumable TIG Kit (tungsten not included) 6 ft. power input cable ( and are not included)
OPTION
Optional Equipment: Power Cool W400 Water Cooler Everlast Series 9 Air cooled TIG Flex head torch with new flexible cables Everlast Series 20 Water cooled TIG Flex head torch with new flexible cable Everlast Series 17 Air cooled TIG Flex head torch with new flexible cables Everlast Series 26 Air Cooled TIG torch Gas lens TIG kit with Tungsten Welding cart TIG Consumables Kits Amp Control TIG torches Welder Cover Amp Control Slider Foot Pedal NOVA Torch and Pedal Kit for PowerTIG 400EXT
RECOMMENDED USES
Recommended Areas of Use: Fabrication/Production welding Motorsports/Offroad General automotive use Prototyping Shipyards Pipelines Farm/Ranch Industrial maintenance Air Craft
Recommended Metals: Steel Stainless Steel Chrome Moly Aluminum Titanium Copper Virtually any weldable meta
TECH SPECS
I IGBT Type:
Module IGBT
Inverter Type:
Digital/Micro-controlled
Output Type:
AC/DC TIG, DC Stick
Voltage/phase:
220/240 V 1 PHASE
Max Rated TIG Amps:
240V: 400A
Max Rated Stick Amps:
240V: 270A
TIG Amps @ Rated Duty Cycle: 400A/24V @ 35% Duty Cycle/ 40º C 300A/21.2V @ 60% Duty Cycle/ 40º C 240A/18.4V @ 100% Duty Cycle/ 40º C
Stick Amps @ Rated Duty Cycle: 270A/ 30.8V@ 35% Duty Cycle/ 40°C 210A/ 28.4V @ 60% Duty Cycle/ 40ºC 160A/ 26.4V @ 100% Duty Cycle/ 40ºC
Max Inrush ( I1MAX ) Amps: @240V 1 ph: 47A
Maximum Rated (I1EFF ) Input Amps: @ 240V 1 ph: 39A
OCV:
66V/VRD: <24V
TIG Output Range DC:
5A-400A/10.2V-24V
TIG Output Range AC:
10A-400A/ 10.4V-24V
Stick Ouput Range DC:
20A-270A/20.8V-30.8V
Stick Hot Start Amps:
0-100%
Stick Function:
Adjustable Arc Force Control
Stick Hot Start Type:
Adjustable Hot Start
Stick Hot Start Time:
0-2 Seconds
6010/Cellulose Capable:
Yes
Minimum Amp DC TIG Start:
5A
Minimum Amp AC TIG Start:
10A
TIG Start Type:
HF/Lift Start
TIG Start Type:
HF and Lift Start
Memory:
Yes
Start Amp Range: DC: 5A-400A AC: 10A-400A
End Amp Range: DC: 5A-400A AC: 10A-400A
Upslope Time:
0-25 Seconds
Down Slope Time:
0-25 Seconds
Preflow time:
0-25 Seconds
Post Flow Time:
0-50 Seconds
TIG Pulse:
Yes
Standard DC Pulse Frequency:
.1-500 Hz
Standard AC Pulse Frequency:
.1-250Hz
AC Advanced Pulse Frequency:
.1-10Hz
Pulse Time On (Duty Cycle):
3-100%
Pulse Amp Range:
5-95%
AC Frequency (Hz):
20-250Hz
AC Balance Range:
5-90%
AC Wave Forms: Advanced Square Soft Square Triangular Sine
Remote Control:
2T/4T with Torch Amptrol settings
Foot Pedal:
Standar
NOTES Notes: If using with a generator, be sure that the generator is rated by its manufacturer as clean power output. This means that the total harmonic distortion (THD) is less that 5%. Use a generator capable of at least 20 000 surge watts for 240V 1 phase operation.
This unit is not designed for Carbon Arc Gouging. Carbon Arc Gouging will void the warranty.
MINIMUM/MAXIMUM
Minimum/Maximum:
TIG: Weld steel to a maximum of 3/4" single pass Weld steel to a maximum of 1+" multi-pass Weld aluminum to a maximum of 3/4" single pass Weld aluminum to a maximum of 1+" multi-pass Weld to a minimum of .005" Steel Weld to a minimum of .010" Aluminum
TIG ratings based off of industry accepted standard practices for quality single and multi-pass welds. AC advanced pulse, when adjusted properly can weld thicker than standard welders with 700 amps output and this is included in Steel and Aluminum maximum capacity statements.
Stick: Weld with a minimum of 1/16" diameter electrode Weld with a maximum of 1/4" diameter electrode
Stick electrode maximum size is ultimately dependent upon type/class of electrode and manufacturer's recommendation. Returns For returns, contact must be made within72 hours of delivery so an RMA number is issued. If there is damage, we can help file a damage claim immediately. DOA items: In the event you receive a non working unit , we will exchange it free of charge. Items returned must be in an GOOD condition. We will inspect all returns before accepting the package. We will not accept packages that have missing parts, damages, and packages that have not been approved for return by our initial contact or packages missing an RMA number. These packages will be refused and sent back to YOU at your cost. Shipping Information: 1- We have an onsite professional shipping and packaging department and adhere to all shipping guidelines. 2- We will try to ship orders as soon as possible after payment approval unless otherwise stated in description. NOTE: Since there are many ways we offer our products, on rare occasions there is a chance an item may go out of stock that we have listed and sold on Pricetronic. We will do our best to expedite backordered items as soon as possible. 3- Please provide a physical address. We will not ship to a PO Box. 4- Shipping charges are for the (48) Continental United States only. 5- We don’t ship to Canada 6- We charge CA tax on all orders 9.5% 7- If you pay via PayPal, shipping will be to your confirmed address only 8- Shipping to AK, HI and PR is more. please email for price. Contact Operating Hours: Monday through Friday: 9AM to 5PM PSTSaturday: 11AM to 4PM (PST)
Returns Accepted for this item if it's within 30 Days