100% Brand New
Battery voltage: 3.7V
Maximum output current up to 1200A
Fully charged, capable of continuously welding 1000 times
Five adjustable power levels, short press button control, blue light indication
Charging port: USB plug for charging
Charging voltage: 5V input (higher voltage input is strictly prohibited)
Charging current: 1A (it is recommended to use a 5V/2A charger)
This product supports charging while using. The remaining battery indicator is green (high), green flashing (medium high), red flashing (medium low), red (low), and the red light is on. Charging is necessary to operate. Low battery level will affect the welding effect
Switching on/off instructions:
Short press to power on
Long press to shut down
6 minutes without any action will automatically turn off
Feature:
1.5 power adjustable, more precise welding with good results, fully charged, can continuously weld 1000 times
2. The spot welding machine comes with a nickel strip, which can be held by one hand and is convenient to use. It can weld mobile phone batteries and support the welding of various common nickel conversion mobile phone batteries. In addition, the portable feature makes it more convenient to repair mobile phones when going out
3. Supports nickel sheet welding with a thickness of 0.1-0.15mm, fully charged state supports 0.15mm nickel sheet welding, intelligent recognition, fully automatic welding operation, simple and convenient, supports stainless steel sheet and stainless iron sheet welding, with firm welding and excellent welding points
4. More precise welding, one hand operation, one hand grip, convenient operation and use, integrated advantage, can free one hand for holding nickel sheets or fixing batteries
5. Intelligent recognition, fully automatic welding, simple and convenient operation. This product supports charging while using. The remaining battery indicator is green (high), green flashing (medium high), red flashing (medium low), red (low). The red light must be charged before it can work.
Note:
Copper and aluminum surfaces cannot be welded, rusted surfaces cannot be welded, and smooth stainless steel surfaces can be welded normally.
Some batteries have one electrode made of stainless steel and one electrode made of aluminum. Our spot welding machine can weld stainless steel electrodes, while aluminum electrodes require ultrasonic welding. Please note.
Reminder again, aluminum electrodes and copper electrodes cannot be welded.
Common circular batteries such as 1865032650 can be soldered. Two needles are stably pressed onto the nickel plate before welding can be output. Lift it up and weld again.
Instructions for use:
Spot welding nickel sheet
1. The battery should be fully charged and must be fully charged. The thickness of the nickel plate for spot welding should not be thicker than 0.15MM.
2. Pay attention to the pressure during spot welding. The harder you press, the smaller the heat; The lighter the pressure, the greater the heat; But if it's too light, it will puncture, and if it's too heavy, it won't hold. So it needs to be done with appropriate force and not too much pressure.
3. The battery should be polished and cleaned to remove the oxide layer and unevenness on the surface. If the soldering pen oxidizes and turns black, please polish it smooth with fine sandpaper.
4. Use the tip of the pen to point it firmly.
Welding method: Visually weld the head and hold it tightly at a 60 ° angle to the horizontal plane. The two needles are simultaneously pressed onto the surface of the nickel sheet, making good contact. The current flows from one needle to the other, and the high current melts the nickel sheet, thus successfully welding the battery and the nickel sheet.
Shipping list:
1x Spot welding machine
1x Nickel strip
USB charging Quick payment, Quick shipment! Due to the light and screen setting difference, the item's color on the picture may be slightly different from the actual color of the item. Please allow slight dimension difference due to different manual measurement. Thanks for your kindly understanding! PAYMENT: 1.We accept Payoneer only. 2.All major credit cards are accepted through secure payment processor Payoneer. 3.Payment must be received within 7 business days of auction closing. 4.We ship to your eBay or Payoneer address. Please make sure your eBay and Payoneer address is correct before you pay. SHIPPMENT: 1. Clear payment must be done within 5 days after placing the order; 2. We ship to Payoneer address, please make sure the address is correct before you pay, and make sure the phone number is filled in. 3. The item will shipped from US/Outside US. 4. The handling time usually takes 1-5 working days. 5. If you have any problem about tracking parcel or delivery time, pls contact us. -30 DAY MONEY BACK RETURN POLICY: 1. If you are unhappy with your item or changing of mind purchases for whatever reason, pls keep the item and package original. Buyer needs to afford the return postage. Besides, original postage will not return. 2. Please contact us within 30 days if you have a faulty item and we will cover the return postage where necessary, we do not cover this outside 30 days of purchase. -ADDRESS CHANGES: 1. If you enter the incorrect name or shipping details before purchasing, we will arrange shipment for you according to your ebay address. 2. We are not responsible for these changes if there is a mistake entered by the buyer.
Returns Accepted for this item if it's within 30 Days