Manually operated, no air or water lines to encumber movement.
Versatile portable spot welder for auto body repair shops and maintenance shops.
Synchronous built-in electronic timer with SCR from 2 to 65 cycles.
Compensation circuit starts the timer only when there is a proper passage of current, which enables to perform on oxidised sheets, on surfaces with paint residues or on black sheets.
Current control with phase shift adjustment to carry out difficult welds, on very thin thickness, on rods with reduced diameter, on stainless steel sheet and similar.
Force adjustment with scale in daN.
Additional arm couplings to provide larger opening between arms.
All transformers are coated with F class insulation material. Tests are made using 4000 volts.
Max weld current approximately
6,000-Amps
(with shortest arms, narrowest gap).
94mm (3.7″) gap between the arms.
22mm (0.866″) diameter arms.
Supplied complete with 125 mm (4.9″) long arms.
Max electrode force with arm length L=125mm is 120daN (
270lbsf
)
Max electrode force with arm length L=500mm is 38daN (
85lbsf
)
Max
380 spots per hour
(6-7 spots per minute, roughly need to wait 10 seconds between welds to dissipate heat).
Choice of additional arm configurations are available, see technical data for details. 12mm diameter rod for electrodes standard.
220V/60Hz/1-phase
20A delayed fuses @ 220VAC required
25lbs net weight (29lbs shipping weight)
Limited quantity in stock, subject to prior sales
$70 flat rate shipping, insured, within USA (excluding AK and HI)