Notify me when the price drops
We will email you if we find a lower price on this product!
Product Description
The new Typhoon 330 is a powerful member of the all new generation of TIG welders from Everlast. The Typhoon family has a long list of next-level features. These features goes far beyond most all other TIG welders on the market. As the top tier line of welders in Everlast's lineup of TIG welders, the Typhoon series has features that lead its class and establish a new standard for AC/DC TIG welders. The Typhoon 330 is a powerful machine that is coupled to an easy-to-use interface. The large 5.1" HD Color LCD screen features the ability to see and set all the parameters at-a-glance on a single screen without endless hidden menus or complicated series of button presses to access and adjust the parameters.
Looking beyond the apparent simplicity of intentional design, you will find a long list of well thought out features that include items like adjustable wave forms on DC pulse, five AC wave forms (yes, five), independent amplitude and split AC wave form control. The list of features continue to peal back like an onion though, in AC mode, with not only the ability to set AC amplitude (positive amperage vs negative amperage) independently, you can also set the machine to split each half of the ac cycle into one of the 5 separate wave forms, and set the AC frequency up to 400Hz. The real difference comes through in AC advanced pulse though with a mixture of both AC and DC negative that allows you to achieve the penetration of a machine with 500A or more. Of course with a standard DC pulse frequency up to 999.9 Hz and the standard AC pulse frequency up to 400 Hz, you'll have maximum control on thin materials as well.
The unit, as mentioned, has five very finely tuned wave forms in AC that are far more stable than many of its competitors. While the Typhoon has all the standard wave forms including Advanced Square, Soft Square, Triangular and Sine wave, it also has the industry's first Trapezoid wave form This gives a whole new feel and level control while welding Aluminum. When used in the split wave form mode as one half of the wave form, the resulting control and effect become mind blowing.
Putting out 325A at max output while sustaining a sustantial 35% duty cycle elevates this machine over the competition with only 300A and lower duty cycles at maximum ouput. This Typhoon is capable of welding on 240 1phase or 3 phase input power without derating the duty cycle of the machine.
If you are looking at the welder for use as a stick welder, the unit puts out one of the smoothest DC arcs you will find, which is perfectly suited for E7018 and similar rods. The arc is stable and spatter free. If you are needing E6010, it does have E6010 capability as well and works well in short and medium arc length conditions. However, this unit is not suited for long arc E6010 or carbon arc gouging applications. The unit does feature an AC Stick function. The AC selection allows you to adjust AC parameters to increase the penetration and travel speed of the rod while welding in AC mode.
330A
Max Rated Stick Amps:275A
TIG Amps @ Rated Duty Cycle:330 @ 40% Duty Cycle, 104°F/40°C
Stick Amps @ Rated Duty Cycle:275A @ 40% Duty Cycle, 104°F/40°C
Max Inrush ( I1MAX ) Amps:220V 1 phase: 65A
220V 3 phase: 32A
Maximum Rated (I1EFF ) Input Amps:220V 1 Phase: 42A
220V 3 Phase: 21A
OCV:TIG: 105V
Stick: 85V
2-325A/10.2-23V
TIG Output Range AC:3-325A/10.2-23V
Stick Ouput Range DC:10-275A/ 20.4-31V
Stick Hot Start Amps:0-100%
Stick Function: Adjustable Arc Force ControlStick Hot Start Type: Adjustable Hot StartStick Hot Start Time:0-2.0 Seconds
6010/Cellulose Capable: YesMinimum Amp DC TIG Start:2A
Minimum Amp AC TIG Start:3A
TIG Start Type:HF (Electronic HV), Lift with Remote, Live Lift
TIG Start Type: Solid State HF and Lift StartMemory: YesStart Amp Range:2/3-325A
End Amp Range:2/3-325A
0-30 Seconds
Down Slope Time:0-60 Seconds
Preflow time:0-30 Seconds
Post Flow Time:0-60 Seconds
TIG Pulse: YesStandard DC Pulse Frequency:0-999.9 Hz
Standard AC Pulse Frequency:0-400Hz
AC Advanced Pulse Frequency:0-10Hz
Pulse Time On (Duty Cycle):5-95%%
Pulse Amp Range:3-100%
AC Frequency (Hz):20-400Hz
AC Balance Range:5-70% of EP
AC Wave Forms:5: Advanced Squre, Soft Square, Trapezoid, Triangle, Sine with the ability to split wave forms
Remote Control: 2T/4T with Torch Amptrol settingsFoot Pedal: StandardThis unit should be operated with clean power generators capable of 15,500 surge watts or greater. The generator must be capable of emitting no more than 5% Total Harmonic Distortion, which is considered "clean" and equal to standard shop power. Any use with generators not rated as clean power output (5% or less THD) by their manufacturer will void the warranty and may damage your machine. Damage may occur gradually over time or immediately.
E6010 may be used with this unit. However, for best operation, a short arc must be used.
TIG:
TIG minimum and maximum capability is generally determined by industry standard practices and governed by practical limits for single and multi-pass welds, aimed at achieving highest quality welds. The Maximum Almuminum thickness expressed here is representative of an increase in normal capability due to the use of the Advanced TIG pulse which uses a high ratio of DC- current to increase penetration.
Stick: